Picture
You'll need:

- two glass coke bottles (or others)
- corks
- thick-walled glass tubes (or other tubes, if easier to get hold of)
- grinder and carbide knife (optional)
- drill slightly smaller than tube diameter
- oil and vinegar

Cut corks to size if they won't fir bottles as they are. Cut an approximately 4-5 cm length of glass tube with carbide knife, and grind at an angle at the top, flat at the bottom, then make sure all sharp edges get smoothed. Drill corks at a diameter slightly smaller than tubes, then force tubes into holes. Fill with olive oil and balsamic vinegar - and never confuse the balsamic vinegar with coke!




Leave a Reply.

    About

    The "Take a Bottle" project is, essentially, an combination of a) my "Follies for Follies" project, which got me into whimsical work, c) recycling and preserving the planet, d) a general tendency to tinker, and e) an ever-existing quest to make glass accessible to a wide variety of people. The concept is simple - taking existing glass (it doesn't have to be a bottle, of course), and turn it into something else. While I am mainly running this project for my own amusement, I am very happy to run workshops on glass recycling and crafting with glass. If you do any of the projects, I'd love to see your results! Email me at sabine [you know what goes here] sabinelittle.com

    DISCLAIMER: I take no responsibility for the success of your projects, or any injury or harm resulting from you following them, including, but not limited to, the handling of glass, tools, etc.!

    Archives

    August 2013
    April 2013
    March 2013
    February 2013

    Categories

    All